EuroCeiling

Description

EuroCeiling is formulated with Acrylic resins to give an beautiful flat finish of great whiteness on ceilings. It has excellent coverage over masonry, brick, AAC walls, FC sheeting etc. Where required make certain that the surface has been primed with EuroPrimer.

Preparation

Ensure the receiving substrate is dry and free of any dirt, grease, dust, fungus, flaking paint, mould, releasing agents etc. Where the substrate requires a primer, EuroPrime must be applied prior to the application of EuroCeiling.

Application

Stir contents thoroughly prior to use. EuroCeiling can be brushed, rolled or sprayed onto the primed substrate. To achieve a high quality finish a “wet edge” must be kept during application.

Caution

• Provide adequate ventilation during use
• Do not apply when temperature is below 10°C or when drying time is below 10°C.
• Avoid exposure to steam and condensation for 48 hours after application of final coat.

First Aid

• If swallowed do not induce vomiting. Give plenty of water to drink. Contact a doctor or the Poisons Information Centre.
• If in eyes hold eyes open and flood with clean water for at least 15 minutes. See a doctor if any irritation occurs.
• Materials Safety Data sheet available on request.

Indemnity

Euroset Trading Pty Ltd & Euroset Manufacturing Pty Ltd will not accept responsibility for any misuse of this product or if not applied by an approved Euroset applicator and in accordance with our technical specifications. Due to our policy of continuing product improvement Euroset Manufacturing Pty Ltd reserves the right to change these specifications without further notice.