EuroPatch
Description
EuroPatch
is a specially made Acrylic based material designed to skim coat
FC sheeting as well as being a highly flexible and adhesive product
for patching and coating various surfaces. It can also be used
as an additive to EuroRender and EuroSkim to increase their flexibility
and adhesion. When coating FC sheeting as a skim coat or patching
various surfaces, cement may be added at a rate of 5-10% by weight
(depending on the surface and air temperature) to increase workability
and speed up the drying time.
Preperation
& Application
Prior
to the application of EuroPatch make certain the substrate (particularly
over FC sheeting) has been fitted by the Builder according to
the manufacturers instructions, and make certain the rebated joints
and corners have been prepared with alkali resistant fibre glass
mesh strips and embedded in EuroPatch Fine. It is preferable that
right angle fibre glass mesh corners are used instead of PVC or
steel corners.
Make certain that the patched areas are dry before coating the
entire area with EuroPatch. It is advisable to prime the substrate
with EuroPrime prior to the application of EuroPatch.Before applying,
make certain the substrate receiving EuroPatch is clean and free
of any dirt, grease, fungus, dust, releasing agents etc.
 Coverage
Coverage
rates will vary depending on the substrate and the thickness applied,
but as an approximate guide 15 Litres of EuroPatch should cover
about 10 –12 sq m (when applied at a thickness of about
2mm).
Wash
Up
EuroPatch
is water based Acrylic material, and as such tools can be washed
in clean water. They should be washed before the material dries.
First
Aid
- If
swallowed do not induce vomiting. Give plenty of water to drink.
Contact a doctor or the Poisons Information Centre.
- If
in eyes hold eyes open and flood with clean water for at least
15 minutes. See a doctor if any irritation occurs.
- Materials
Safety Data sheet available on request
Indemnity
Euroset
Trading Pty Ltd & Euroset Manufacturing Pty Ltd will
not accept responsibility for any misuse of this product or if
not applied by an approved Euroset applicator and in accordance
with our technical specifications.
Due to our policy of continuing product improvement Euroset
Manufacturing Pty Ltd reserves the right to change these
specifications without further notice.
|
