EuroSealer

Description

EuroSealer is a top quality sealer undercoat formulated to provide maximum adhesion and coverage to any masonary materials as plaster and blue board, concrete and masonary bricks, etc...
EuroSealer undercoat can also be applied over new and existing painted surfaces, as sealing and bonding coat, specially over glossy surfaces prior to painting.
EuroSealer undercoat has a matt finish

Application

Stir contents thoroughly prior to use. EuroSealer undercoat can be brushed, rolled or sprayed onto the primed substrate.

Caution

• Provide adequate ventilation during use
• Do not apply when temperature is below 10°C or when drying time is below 10°C.
• Avoid exposure to steam and condensation for 48 hours afterapplication of final coat.

First Aid

If swallowed, Do Not induce vomiting. Give plenty of water to drink. Contact a doctor or the Poisons Information Centre. If in eyes, hold eyes open, flood with water for at least 15 minutes, and see a doctor if any irritation occurs. Material Safety Data Sheet available on request.

Indemnity

Euroset Trading Pty Ltd & Euroset Manufacturing Pty Ltd will not accept responsibility for any misuse of this product or if not applied by an approved Euroset applicator and in accordance with our technical specifications.Due to our policy of continuing product improvement Euroset Manufacturing Pty Ltd reserves the right to change these specifications without further notice.

Usable tools