EuroSilk

Description

EuroSilk is formulated with pure acrylic resins to produce a premium ultra low sheen finish, that provides good hiding power and is both durable and washable while still providing an elegant finish. EuroSilk may be used over masonry, Brick, AAC walls, FC Sheeting etc, providing the surface has been primed with EuroPrimer.

Preperation

Ensure the receiving substrate is dry and free of any dirt, grease, dust, fungus, flaking paint, mould, releasing agents etc. Where the substrate requires a primer, EuroPrime must be applied prior to the application of EuroSilk.

Application

Stir contents thoroughly prior to use. EuroSilk can be brushed, rolled or sprayed onto the primed substrate. To achieve a high quality finish a “wet edge” must be kept during application.

General Data

Flash Point: Non Flammable
Recommended Film Thickness per coat: Depends on substrate and type of finish
Coverage: Up to 14 square m per litre
Drying Time: Touch dry in 30 minutes at 20‘C Recoat after 12hrs depending on temp. and humidity
Durability: Interior & Exterior
Thinning: If necessary thin with up to 5% water
Colour: May be tinted as required
Packaging: 15 Litre Buckets

Caution

  • Provide adequate ventilation during use
  • Do not apply when temperature is below 10°C or when drying time is below 10°C.
  • Avoid exposure to steam and condensation for 48 hours after application of final coat.

First Aid

  • If swallowed do not induce vomiting. Give plenty of water to drink. Contact a doctor or the Poisons Information Centre.
  • If in eyes hold eyes open and flood with clean water for at least 15 minutes. See a doctor if any irritation occurs.
  • Materials Safety Data sheet available on request

Indemnity

Euroset Trading Pty Ltd & Euroset Manufacturing Pty Ltd will not accept responsibility for any misuse of this product or if not applied by an approved Euroset applicator and in accordance with our technical specifications.
Due to our policy of continuing product improvement Euroset Manufacturing Pty Ltd reserves the right to change these specifications without further notice.

home